GRP Sectional Panel Tanks · SMC Modular Construction · Karoch Engineering
GRP Sectional Panel Tanks Nigeria — Modular, Scalable, Long-Life
The most versatile tank in Nigeria’s market. GRP sectional panel tanks can be assembled on-site to virtually any configuration — inside buildings, on rooftops, in restricted-access compounds — with a service life of 30 to 50 years.
WHAT IS SMC PANEL TECHNOLOGY
What Makes SMC Panel Construction Different?
SMC stands for Sheet Moulding Compound — a compression-moulded fiberglass composite panel system used to build sectional GRP tanks. Each panel is factory-manufactured to precise dimensions, then bolted together on-site using stainless steel hardware and food-grade sealant.
The result is a tank that can be built to any rectangular volume — 500 litres or 500,000 litres — without requiring a factory-built shell to be transported to site. This makes SMC sectional panel tanks the only practical option for rooftop installations, buildings under construction, and sites with restricted vehicle access.
GRP Sectional Panel Tank — Key Features
▸ Modular panel design — any rectangular volume from 500L to unlimited
▸ Factory-moulded SMC panels — consistent quality, no site fabrication quality variance
▸ Food-grade resin available — NSF-61 compliant for potable water storage
▸ UV-stabilised outer coat — designed for outdoor installation in Nigerian climate
▸ Stainless steel hardware — no corrosion at joints or connections
▸ Flat-pack delivery — panels stack for transport, no oversize load requirements
▸ On-site assembly by Karoch installation team — typically completed in 1–3 days
▸ Accessible manhole cover — standard 600mm for inspection and cleaning
▸ 30–50 year service life — under normal operating conditions
Capacity, Sizes & Panel Configurations
|
Specification |
Detail |
|---|---|
|
Minimum Capacity |
500 litres |
|
Maximum Capacity |
Unlimited (modular configuration) |
|
Standard Panel Size |
500mm × 500mm, 1000mm × 500mm, 1000mm × 1000mm |
|
Standard Tank Height |
1.0m, 1.5m, 2.0m, 2.5m, 3.0m (custom heights on request) |
|
Common Volume Configurations |
1,000L / 5,000L / 10,000L / 20,000L / 50,000L / 100,000L+ |
|
Shape |
Rectangular (square or oblong base) |
|
Installation |
Base-mounted (concrete pad) or rooftop (with structural engineer sign-off) |
|
Panel Material |
SMC (Sheet Moulding Compound) GRP |
|
Hardware |
Grade 304 or 316 stainless steel bolts and flanges |
|
Liner Resin |
Standard polyester or food-grade isophthalic polyester (specify at order) |
|
Accessories |
Ballcock assembly, overflow, outlet valve, inlet, vent, manhole cover, ladder |
What Are GRP Sectional Panel Tanks Used For?
▸ Potable water storage — residential estates, commercial buildings, schools, hospitals
▸ Overhead cold water storage — rooftop tanks for gravity-fed building water supply
▸ Fire fighting water reserve — dedicated fire suppression storage at ground or elevated level
▸ Irrigation and agricultural water storage — farm and greenhouse systems
▸ Industrial process water — manufacturing, cooling tower make-up water
▸ Wastewater collection — below-ground sump tanks for treated or collected effluent
INSTALLATION PROCESS
|
STEP 1 |
Site survey and base assessment. Our team confirms the installation surface, load-bearing capacity, and access requirements before any order is placed. |
|
STEP 2 |
Civil base preparation. We prepare or verify the concrete base pad — level, cured, and correctly dimensioned for the tank footprint. |
|
STEP 3 |
Panel delivery to site. Panels are delivered flat-packed and stacked. No oversize load, no specialist crane equipment for most configurations. |
|
STEP 4 |
On-site assembly. Our trained installation team bolts, seals, and tests the assembled tank on the day. Typical assembly time: 1–3 days depending on volume. |
|
STEP 5 |
Pipework connections and commissioning. All inlet, outlet, overflow, and vent connections are completed and tested before handover. |
effluent
FAQ
GRP Sectional Panel Tank — Frequently Asked Questions
How much does a GRP sectional panel tank cost in Nigeria?
A: Tank cost varies by capacity, panel grade, and fitting specification. For a general price guide covering common capacities with typical fitting packages, see our FRP Tank Price Guide. For a specific project quotation, contact our team directly.
Can GRP sectional tanks be installed on rooftops?
A: Yes — provided the roof structure has sufficient load-bearing capacity for the full water weight. A 10,000-litre tank holds 10 tonnes of water. We recommend a structural engineer’s assessment for any rooftop installation above 5,000 litres.
How long does installation take?
A: Typical on-site assembly time for a 10,000–50,000 litre tank is 1–2 days. Larger configurations of 100,000+ litres take 3–5 days. Civil base preparation, if not already in place, adds lead time.
What is the warranty on GRP sectional panel tanks?
A: Warranty terms are confirmed at the quotation stage and depend on the application, resin grade, and site conditions. Contact our team to discuss your specific project.
Can the tank be expanded after installation?
A: Yes — this is one of the key advantages of the sectional panel system. Panels can be added to increase capacity without replacing the entire tank. Confirm expansion plans at the original installation stage so the base is sized correctly.
let’s get connected
Have a Question?
Our client-focused approach ensures transparency, accountability, and consistent performance at every stage.